TUNER ICOM AH-4

HARGA:   Rp. 7,250,000
The Icom AH-4 automatic antenna tuner is designed to work with select ICOM transceivers including the Icom. It provides reliable matching of frequencies from 3.5 to 54 MHz when using a wire of at least 23 feet (7 m) in length. It can also be used for matching 7 to 54 MHz when used with the optional ICOM AH-2b antenna element. The built-in 8-bit microprocessor chooses the lower SWR condition from more than 1,040,000 different LC (coil/capacitance) combinations.
The LC combinations of 45 previously-used frequencies are automatically memorized by the AH-4. Once a frequency is memorized, the AH-4 tunes on that frequency is less than one second. (Memories are retained only when the power is on). The AH-4 is sealed in a plastic weatherproof case for convenient mounting outdoors under your antenna. The transceiver and the AH-4 tuner must have a proper ground connection. Use a short heavy gauge wire or strap for this. This tuner may be attached to a pole using the two supplied U Bolts, or to a flat surface (screws and bolts are supplied).
The AH-4 comes with a 16 foot (5 m) control cable that connects to the rear panel of compatible Icom transceiver. A 16 foot (5 m) raw coax cable and two PL-259s are supplied to connect the transceivers antenna output to the AH-4 antenna input. The PL-259s must be soldered on by the user.
This tuner requires about 10 watts (5-15 Watts) to activate and can handle up to 120 watts. It operates on 13.8 VDC (less than 2 Amps) drawn from the transceiver control cable. Size:  7 x 2.9 x 9.2 inches 2.65 lbs. (172x70x230mm 1.2 kg). 

HF SSB ICOM 718

HARGA:  Rp. 12,500,000 ( RADIO SAJA )
HARGA LENGKAP MARINE : RP 23,350,000 ( RADIO - TUNER AT130 - ANTENA SSB 393 - KABEL RG8 - POWER SUPPLY 40 AMPER )
HARGA LENGKAP BIASA : RP 19,350,000 ( RADIO - TUNER AT130 - ANTENA OPEN DIPOLE - KABEL RG8 - POWER SUPPLY 40 AMPER )

The HF bands allow you to communicate over long distances covering many km even to the other side of the world. With the superior performance found in the IC-718 such as wide dvnamic range, high C/N ratio, and full duty operation you will find making these contacts easy. Experience the combination of the latest RF and digital technology, along with the size and simplified operation. You will see the IC-718 will be the most practical rig you will ever own.
The IC-718 has a speaker mounted on the front panel. With the speaker facing the operator, audio sounds can be clearly heard without impediment during operation. It is no longer necessary to manually increase the volume to try and capture audio sounds.
The IC-718 has 0.03-29.999999 MHz* general coverage receive capability. A 4-element system is employed for the 1st receive mixer, providing superior receive IMD, especially from in-band near-by interfering signals. A well-designed double-conversion system to help minimize image and spurious responses for better signal fidelity, is also built-in. A newly designed PLL circuit has been adopted to improve C/N ratio characteristics. The combination of the 4-element system mixer and new PLL circuit allows superior basic performance as that of a commercial grade transceiver.
*Guaranteed range: 0.5-29.999999 MHz
The DSP includes the following to give you superior receiver quality in your shack, vehicle or during DX'pedition.
*DSP is built in to U.S. models, but may be optional outside the U.S. Please check with your dealer.
Noise reduction:
Pulls desired AF signals from noise. Outstanding S/N ratio is achieved, providing clean audio in SSB, AM and FM.
Automatic Notch filter:
This automatically minimizes beat signals and heterodynes while preserving the receive signal. Also, the notch frequency is automatically adjusted to follow interfering beat signals - for example, reducing interference from RTTY signals during SSB operation.
To reject interference, the IC-718 has an IF shift function which shifts the center frequency of the IF passband electronically to reduce adjacent interference.
This feature compresses microphone audio input to increase average audio output level. The result is, that talk power is increased. The compression level is adjustable for your preference. This function is effective for long distance communication, or when propagation conditions are poor.
RF gain control is combined with the squelch control. The RF gain adjusts minimum response receiver gain, and ignores signals weaker than the pre-set level - providing pleasant stand-by, or scanning.
An electronic keyer with a variable dot/dash ratio (2.8:1 to 4.8:1) control is built-in. By simply connecting a paddle, easy CW operation can be made. The CW pitch and the key speed are also variable from 300-900 Hz, 6-60 wpm, respectively. Of course, full break-in capability is available with the adjustable break-in delay.
A VOX (Voice operated transmission) is included with the IC-718. It provides handsfree operation by detecting audio signals from the microphone. It' s easy! Flexible filter selection

An optional IF filter can be installed into the transceiver to suit your operating preference.

When the optional CR-338 HIGH STABILITY CRYSTAL UNIT is installed, you get a very high frequency stability of ±0.5 ppm.

Either the optional antenna tuner unit, AT-180 or AH-4 can be used with the IC-718 to suit your installing conditions, or operating style. Of course, the AH-4 control circuit is built into the IC-718.
The IC-718 is equipped with a minimum number of switches and controls for superior feature selectability. The 10-key pad on the front panel for entering directly an operating frequency, or a memory channel number. The auto tuning steps function helps quick tuning is activate when turning the dial quickly. And the band stacking register is very convenient when changing operating bands.
Built-in multi functional digital S/RF meter indicates signal strength level while receiving, and either transmit output power, ALC level or VSWR ratio while transmitting.
A clear, electronically-generated voice announces operating frequency, mode and receiving signal strength level when the optional voice synthesizer unit, UT-102, is installed.

• USB, LSB, CW, RTTY(FSK) and AM modes are built-in
• Level adjustable noise blanker
• RF attenuator and Pre-amplifier
• Variety of scanning function types
• Total 101 memory channels are available

ICOM IC-M36 VHF MARINE

HARGA: RP 2,900,000

In marine environments there are many sources of noise that can affect the quality of your communications, such as engine noise, breaking surf and more. The IC-M36 automatically adjusts the outgoing voice and the incoming audio to compensate for the ambient noise level: whether you're in a loud environment or in a quiet area, the IC-M36 ensures your radio conversation is sent and received as clearly as possible.

And yes, it floats

Continuing the legacy of the IC-M34, the IC-M36 floats back up to the surface if dropped overboard, even if the optional speaker microphone, HM-165, is attached.

AquaQuake draining function

The vibrating "buzz" sound clears water away from the speaker grill.

LOUD button

When you need an instant “boost” in the volume, a simple push of the “LOUD” button gives you full volume immediately. In addition, holding the “LOUD” button mutes the audio output.

Noise cancelling microphone

The sub-microphone on the rear panel inverts phase and cancels out ambient noise from the main microphone. As a result, the IC-M36 reduces the affect of background noise (particularly trebly noise) from the transmitted signal and makes it easier to catch voice communication.

Automatic volume adjustment

When in an engine room or high noise environment, the sub-microphone detects the ambient noise and the IC-M36 automatically increases the volume output to suit the surrounding environment.

FURUNO PR240 POWER SUPPLY

HARGA : RP 15,500,000

This is an AC/DC power supply unit. A power supply unit also known as a rectifier is a device that supplies power to an electronic load by converting Alternating Current (AC) to Direct Current (DC). PR-240 unit supplies power to the system. PR-240 connection converts 200-230 volt alternating current (AC) into a steady low-voltage direct current (DC) usable by the system. It is shipped ready for connection and no soldering is required. Different ships have different supply voltages, this device provides for input voltage modification. For connection to 100VAC- 115VAC, tap and terminal board connections need to be changed and for this too no soldering is required. The maximum load for this unit is 8A 24V Direct Current output. Labels are supplied in the accessories and should be attached to the front panel of the PR-240 according the mains supply of the ship. Components of PR-240 supply unit include: 12 A DC Breaker for DC output, 5 A AC Breaker for AC input, AC-OFF detection, ON/OFF Backup, Fuse (6.3A,240V), 24 VDC output voltage adjustment, Wiring change for AC input voltage selection (115 V /230V) and Jumper Wire for AC input voltage selection (115 V/230 V).

COMPASS AZIMUTH 1000 KVH

.
HARGA : RP 16,500,000
If you want a compass with the features, quality, and design that meet the needs of your commercial vessel, the KVH Azimuth 1000 is the compass system for you! By combining digital heading and the familiar compass rose on a large, heads-up display with an easy-to-use off-course mode, the Azimuth 1000 makes steering easy and precise – no matter how fast you’re going or how rough the seas.
Totally self-contained for easy installation and designed to military quality standards, the Azimuth 1000 was named “Best Electronic Compass” by the National Marine Electronics Association (NMEA) dealers for eight consecutive years. Azimuth 1000 is standard equipment on many leading brands of powerboats. Even the U.S. Navy approved the replacement of its ships’ magnetic card compasses with KVH digital compasses. The Azimuth 1000 can also provide heading data for use with radars, autopilots, plotters, and PC software through its fast,10 Hz NMEA 0183 output port.

INMARSAT C FELCOM 18 WITH SSAS

.
HARGA : RP 97,000,000 

Proven solutions for Inmarsat-C/Inmarsat MINI-C services fully incorporated SSAS and LRIT capabilities The FELCOM18 is FURUNO's new Inmarsat-C Mobile Earth Station. It provides a high quality two-way telex and data link between ships and other parties at sea or on land. All functions and services of the Inmarsat-C system are provided: EGC (Safety NET/FleetNET), distress message handling, two-way digital store-and-forward messaging including polling, data reporting, E-mail, etc. Distress alert are initiated by the remote distress alert unit. The distress message including own ship's position is easily edited. A PC can be used for editing the message via Ethernet when it is supplied with dedicated software.
The FELCOM18 consists of an antenna and display unit with keyboard. The display unit embodies a 10.4" color LCD and processor unit. The distress alert button is incorporated in the display for emergency. Data files and utility program on SD Memory Cards are easily loaded into the processor through the front loading card slot in the display unit. The compact design of display unit and omni-directional antenna unit offer space-saving installation. An optional GPS module is available for position reporting without operator's intervention. GMDSS compliance can be achieved by adding a printer and a AC/DC power supply unit.

• Inmarsat-C Mobile Earth Station terminal for GMDSS application
• Full GMDSS compliance with optional printer and AC/DC power supply
• SSAS capability with SSAS Alert Unit
• Compatibility with LRIT application
• A wide variety of communication schemes available: telex,FAX, emailing, EGC, data reporting/polling, etc.
• SD card for recording media

FURUNO SATELITE COMPASS SC-50

HARGA : RP 74,000,000
. We are excited to introduce our second generation Satellite Compass, the SC50, which utilizes Furuno’s advanced GPS Kinematic technology. Satellite Compass performance is not affected by ship’s speed, latitude, geomagnetism, etc. This hybrid integration of GPS receiver technology and a 3-axis solid-state rate sensor provide accurate and steady heading information, even when bridges or tall buildings block satellite signals. Unlike conventional magnetic and gyro compasses, accuracy is not affected by G-force or velocity. Furthermore, when compared to other GPS based compass systems incorporating only two antennas, our addition of a third GPS antenna provides enhanced accuracy while reducing the negative effects of pitch, roll, and yaw.
The SC50 offers highly accurate GPS WAAS Data for SOG, COG, ROT, and L/L. Multiple, programmable hi-speed heading data outputs allow you to send this information where you need it, and our unique Analog Pitch and Roll Output can be used to enhance your Furuno Sonar System.
This Satellite Compass is ideal as an alternative to a traditionally expensive and high-maintenance gyrocompass for non-compulsory vessels, as well as being the perfect back up solution to a gyro for a compulsory vessel. The SC50 offers a wide range of applications for providing fast, stable, precision heading information to numerous devices, including: Radar/ARPA, Satellite Communications & TV systems, Autopilots (based upon I/F type), AIS, ECDIS, Scanning Sonar, Chart Plotters, etc.
Note: If used with NavNet TZtouch, IF-NMEA2K2 is required to convert from NMEA0183 to NMEA2000

Standard Features

• Newly designed processor unit, providing enhanced accuracy and performance
• Multiple, programmable hi-speed heading data outputs in IEC 61121-1/2(NMEA0183/HS)
• Highly Accurate GPS WAAS Data - SOG, COG, ROT, and L/L
• Unique Analog Pitch and Roll Output for Furuno Sonar Systems
• Heading information for Radar/ARPA, AIS, ECDIS, Scanning Sonar and Chart Plotter
• Typical heading accuracy of 0.8 degrees for SC50
• Tri-antenna system reduces effect of pitching, rolling and yawing
• Short settling time of 3-4 minutes
• Clear 4.5 inch backlit Silver Bright LCD
• Heading output in NMEA 0183, IEC 61162-1 and AD-10 (25ms update)
• Four display modes: Compass Rose, Steering, Nav Data, Heading Mode
• Follow-up rate of 45 degrees/second
• Works as normal GPS navigator
• 12 discrete channels
• No mechanical parts such as gimbals or rotating meter, making compass free from routine maintenance
• IMO MSC.116(73) Type Approved as a verified THD -Transmitting Heading Device

Shipping Information

• TBA

Power Requirements

• 12-24 VDC

WINDSPEED CLIPPER

HARGA : RP 10,500,000

The Clipper Wind system shares the same 110mm square case as its sister instruments in the Clipper range. the display is exceptionally large and clear, with 60 segments for full 360 degree direction indication. Windspeed is shown in knots, M.P.H. or Metres/second. The pointer style is selectable, from the single segment shown above, to multi segments for greater clarity or a ‘windex’ style indicator. The Masthead unit is well proven and supplied with 20 metres of cable as standard
Clipper Wind system is supplied complete with Display unit, masthead unit with cable and mounting blocks.

MAGNETRON MG 4010

HARGA ; 24,500,000

ABRIDGED DATA 

Compact, rugged, lightweight, fixed frequency pulse

magnetron with very low levels of unwanted emissions.

Operating frequency...........................9410 ± 30MHz

Typical peak output power.....................12.5 kW

GENERAL

Electrical Cathode

.......................................................

indirectly heated

Heater voltage (see note 1) :6.3 V

Heater current at 6.3 V (see note 2) 0.5A 

Cathode pre-heating time (minimum)

(see note 3) :60s

Input capacitance :8.0pF

max

Temperature coefficient of frequency

Mechanical

Overall dimensions :see outline

Net weight : 250 g approx

ICOM IC M24 HT MARINE

HARGA RP 2,550,000

Energy-saving 3.7V circuitry

The IC-M24 is powered by the 3.7V Lithium-Ion battery pack, BP-266, to reduce the volume and weight of the radio. A newly developed PA circuit produces 5W (approx.) RF output and powerful 600mW (typ.) audio even at this low voltage, while saving battery consumption for 10 hours of operating time. *
Typical operation with Tx (Hi): Rx: standby=5:5:90.

ICOM M34 HT MARINE

HARGA     RP 2,600,000

Easy to see LCD with large channel indication

The IC-M34 has an easy to see LCD (32 × 16 mm; 1¹⁄₄ × ⁵⁄₈ in) with large 2-digit channel number indication. The volume and SQL levels are shown in the display. LCD and key backlighting is standard for night
time operation.

Other features

• Powerful 5W output power
• Dual/Tri-watch functions
• 4-step battery life indicator
• Weather channel with weather alert
• 2-step power saver
• Auto scan function
• Instant access to Ch 16 or Ch 9
• Optional battery case for using with alkaline cells
  (The IC-M34 may sink when the battery case is attached, depending on the installed batteries)

REPEATER MOTOROLA CDR 500

'
HARGA RP 54,500,000
BOX ORIGINAL MOTOROLA CDR 500 + INTERFACE RICK
RADIO MOTOROLA GM 338 25 WATT
POWER : 220 VAC / 13,8 VDC

As your business grows and changes, your communication requirements expand too. Available in lowband, UHF and VHF frequencies, the Motorola CDR500 repeaters suit a wide variety of applications and can be integrated with your existing infrastructure to meet your needs.

Features and Benefits

Flexible

• Users have the flexibility to choose their frequency and power levels best-suited for their business or to combine two frequencies to create bi-directional or crossband repeater
• The CDR500 can be installed in a 19" rack or mounted on the wall with a handy, lockable wall mount
• The sleek and compact design of CDR500 allows quick and easy access for system adjustment

Compact & Reliable

• A wide range of radio accessories and antenna enhances the repeaters' capabilities

AIS CLASS B SI 50N SAMYUNG

HARGA    29,500,000
AIS – 50N Class B AIS

Features	AIS – 50N
Size	164mm (H) x 183mm (W) x 91mm (D)
Display	5.6” diagonal, TFT colour, 480 x 640 pixels
Supply voltage	10 to 34 V DC
Supply current	13.8 V, 0.9A min – no backlighting. 2A max – full backlighting.
Operating temp.	-10°C ~ +50°C
Alarms	Arrival radius, anchor, XTE, danger, too shallow, too deep, fish, temperature, temperature rate, low battery, low fuel (optional), loss of DGPS fix, radar guard zone, dangerous AIS vessels.
Chart card	C-MAPTM SD Card (NT-MAX, NT+ or NT)
User card	SD Card
Waypoints	Up to 5000, with default or user-defined alphanumeric names up to eight characters.
Routes	100 Routes, with up to 100 points each
Tracks	By time or distance, 10 track of 5000 points
Chart datums	216 Chart datums (see below). One user-defined map shift.
Chart scale	0.2 to 500 nm for chart (chart dependent) down to 0.01 nm in plotter mode.
NMEA	NMEA 0183 4800, 9600, 38400 baud NMEA 2000

Features	AIS – 50N
Frequency	156.025MHz ~ 162.025MHz
	Default channel 88B, AIS (162.025MHz)
	Default channel 87B, AIS (161.975MHz)
Channel spacing	25kHz
VHF ANT connector	TNC
GPS ANT connector	BNC
Antenna impedence	50Ω
Frequency Stability rate	±10PPM (-20°C ~ +60°C)
Data rate	9600bps
Power supply	DC 12V ~ 34V (DC 12V, 1.2A Max.)
Operation temp.	-15°C ~ +55°C
Output power	2W (33dBm ± 1.5dB)
Modulation	GMSK
Sensitivity	-107dBm
Adjacent channel	70dB
Co-channel	10dB
IMD	65dB
Blocking	84dB

ICOM VHF DSC IC-M412

..
HARGA....................RP 2,350,000
HARGA LENGKAP : RP 4,750,000 ( RADIO - ANTENA SHAKESPEARE 425C - KABEL RG8 - POWER SUPPLY 30 AMPER )

Compliant to new FCC Class D DSC Regulations

• Escalating DSC Alarm
• An on/off switch for the radio to automatically switch to channel 16 when a DSC call is made
• 2 receivers, one for the radio and one to monitor channel 70 for DSC full time

Class D digital selective calling

The built-in Class D DSC provides additional safety at sea. The built-in DSC watch function monitors Ch 70 (DSC channel) activity, even while you are receiving another channel. Distress, individual, group, all ships, position request/reply, polling request/reply and DSC test calls can be sent. DSC messages can be received and automatically stored in the message memory.

Common GPS/NAV interface

When connected to an external GPS receiver, current position and time are shown on the IC-M412's display. When receiving position information from another vessel, the IC-M412 can transfer it to a navigational device via NMEA 0183 connectivity.

NARROW BAND DIRECT PRINTING GMDSS RADIO SAMYUNG SRG 1150DN

..

Marine MF/HF Radio (DSC, NBDP) SRG 1150D

HARGA.................................................RP. 82,000,000

HARGA KOMPLET..............................RP 95,500,000 (  TERMASUK 2 ANTENA 393, POWER SUPPLY 24 VDC 60 AMP, KABEL RG 8, JASA INSTALASI )

SRG-1150DN/1250DN (DSC, NBDP) MF/HF Radio Equipment, which is designed and developed for medium and long range communications, fully complied with all the requirements of GMDSS that can be installed on both IMO and non-IMO vessel. SRG-1150DN/1250DN (DSC, NBDP), which is intergrated with DSC unit, Direct Digital Synthesizer (DDS) and Noise Blanker Circuit, enables reliable communications and also ease of installation owing to compact and light weight with NBDP function.

Key features

• Compliant with ITU, IMO and GMDSS.
• Compact & transmitter-receiver with a built-in DSC.
• Easy to read information with large LCD(10.4) for NBDP terminal.
• Easy to read Rx & Tx frequency at a time.
• Available scanning variability of transmitter output, frequency & channel.
• High stability for frequency with 10Hz Step Synthesizer.
• Built-in alarm signal (2182KHz).
• Storing up to 100 transmitted message (editable).
• Storing up to 100 received message (every 50 messages for distress and ordinary).
• Self-diagnosis function for easy maintenance.
• Memory 100 Tx & 100 Rx Messages
• Emission: J3E; H3E; F1B
• Memory: 16 Mb
• Direct Digital Synthesizer and Noise Blanker

KODEN ECHOSOUNDER CVS128

..

CVS-128 8.4-inch Color LCD Echo Sounder　..

HARGA..........................RP 27,500,000

Features

・ Koden Digital Filtering (KDF™) Eliminates clutter by filtering out the noise to provide a clearer more detailed image that enhances fish targets in shallow and deep depths, making it easier to differentiate between baitfish, larger fish, schools of fish and the sea floor. ・ 600 W or 1 kW Output Power The 1 kW is more suitable for detection at deeper bottom. ・ RGB Output to VGA Monitor RGB output for connecting optional external VGA monitor. ・ Exclusive Sona-Tone Identifies what’s under your boat with different sounds for fish and schools of fish. ・ Easy Operation Easy access to all system functions with backlit keypad, programmable function keys, comprehensive menus, and dedicated rotary knobs for instant control of HF and LF Gain. ・ Store Image Stores up to 10 screen images in built-in memory for recall later by “one-touch”. ・ Fishing Hot Spot Leads you back to your favorite fishing hot spots or other previously saved positions in memory with input from optional GPS sensor. ・ Auto Function Digitally selects the most reliable setting for such functions as Gain, Range, and Shift. ・ Sunlight Viewable Brilliant 8.4” color LCD display with 8, 16, or 64 color levels and an anti-reflective coating for excellent readability in direct sunlight. ・ Easy Installation Sleek, waterproof (IPX5 rating) case design with built-in overhead and flush mounting for easy installation.

Main Specifications

Main functions Zoom, Auto, A-scope, Presentation colors: 64, 16, 8 colors, Store image, Fishing Hot Spot, Sona-Tone Basic range 2.5 to 1200 Meter 10 to 3600 Feet 2.5 to 700 Fathom/ Italian Fathom Output power (RMS) 600 W/ 1 kW Output frequency Dual 50/200 kHz Water protection IPX5 Dimensions 263(H) x 274(W) x 133(D) mm Weight 3.2 kg Power supply 10.8 to 31.2 VDC

 

GARMIN RADAR GMR 18HD

HARGA :  RP. 21,000,000

Our next-generation, 4 kW high-definition GMR 18 xHD dome radar pairs ease of use with advanced open-array features. Its intuitive operation makes modes and settings simple to understand so you can enjoy great performance without a lot of technical know-how.
The GMR 18 xHD delivers higher resolution than our previous generation 18” dome radars. New Dynamic Auto Gain and Dynamic Sea Filter continually adjust to your surroundings, providing optimal performance in varying conditions. Choose from multiple levels of aggressiveness or use manual gain adjustment. Dual range operation allows fully independent split-screen display of far and close radar views in full 8-bit color (select chartplotters); range of 48 nm. Optional “No Transmit Zone” can protect areas behind the radar from being radiated while providing full forward-looking radar capability. This makes installation more flexible by providing more suitable installation options on your boat.

• 4 kW high-definition 18” dome radar
• Pairs ease of use with advanced open-array features
• 48 or 24 RPM rotation speeds for fast screen refreshes, auto adjusts as needed based on range
• 48 Mile max range setting
• No complex user settings, easy to install and start using

Compatible Device

AQUAMAP® 80xs

The AQUAMAP 80xs keyed chartplotter/sonar combo has a 8” color SVGA display and comes preloaded with a worldwide basemap. HD-ID, CHIRP and ClearVü with CHIRP sonar technology are built-in allowing you the flexibility to choose from several optional transducers.