ELECTRONICS MARINE NAVIGATION SPECIALIST

Marine Navigation Specialist And Partner Your Electronics Design

Partner Your Electronics Design & Marine Electronic Navigations Specialist

Kamis, 10 Agustus 2017

MARINE RADAR ICOM MR1210R2 36NM COLOR LCD


HARGA : RP40,000,000

MR-1210RII : 4kW Radome Scanner, 36NM range observation

2-feet (60cm) radome scanner for MR-1210RII

2-feet (60cm) radome scanner
for MR-1210RII

12.1-inch Color TFT Display (600×800 dots)

The 600cd/m2 color TFT offers bright, vivid echoes with 32 steps gradient intensity. The display and display color (day, night and user settings) can be instantly adjusted with the “BRILL” button. The full screen mode enlarges radar echoes to full size with transparent menus and operating information.

Day setting
Day setting
Night setting
Night setting
Full screen mode
Full screen mode

AIS (Automatic Identification System) overlay function*

When connected to an external AIS receiver or AIS transponder, the MR-1210 overlays the received AIS information on the radar echo. You can see up to 100 AIS targets and check detailed information of the individual vessel such as speed, course, heading, vessel type and size.

Other vessel AIS information
Other vessel AIS information
Own vessel information
Own vessel information
AIS list
AIS list

MARINE RADAR ICOM MR-1210TII 4kW Open Array Scanner 48NM


HARGA : RP 60,000,000

4-feet (120cm) open array scanner for MR-1210TII/TIII
4-feet (120cm) open array 
scanner for MR-1210TII/TIII

Display Unit

 

MR-1210RII

MR-1210TII
(4 ft model)

MR-1210TIII

(4 ft model)

(6.5 ft model)

Display type12.1-inch TFT color LCD
Resolution600×800 dots
Minimum range25m (at 1/8 NM range)
Maximum range36NM48NM72NM
Range scales (NM)1/8, 1/4, 1/2, 3/4, 1, 1.5, 2, 3, 4, 6, 8, 12, 16, 24, 32, 36,
48*1, 64*2, 72*2
*1 MR-1210TII/TIII only
*2 MR-1210TIII only
Preheat time90 seconds
Power supply10.2–42V DC
Power consumption
(at zero wind velocity)
60W (approx.)70W (approx.)80W (approx.)90W (approx.)
Usable Temp. range−15°C to +55°C
Input data formatNMEA 0183, N+1, AUX, IEC61162-2
Output data formatNMEA 0183

Scanner Unit

 

MR-1210RII

MR-1210TII
(4 ft model)

MR-1210TIII

(4 ft model)

(6.5 ft model)

Scanner type2ft (60cm) radome scanner4ft (120cm)
open array scanner
4ft (120cm) open array scanner6.5ft (200cm) open array scanner
Rotation speed24, 36rpm typ.24, 36rpm typ.22, 24, 36rpm typ.
Horizontal beamwidth4°typ.2°typ.2°typ.1.2°typ.
Vertical beamwidth22°typ.23°typ.23°typ.23°typ.
Side lobe−22dB typ.−24dB typ.−24dB typ.−27dB typ.
Usable Temp. range−25°C to +70°C
Usable humidity rangeLess than 95% (at 40°C)
Frequency9410MHz ±30MHz
ModulationP0N
Peak output power4kW4kW6kW
Pulse-width/
repetition rate
80nS/2160Hz, 80nS/1440Hz, 250nS/1440Hz, 350nS/1440Hz,
350nS/720Hz, 900nS/720Hz, 900nS/660Hz*
* MR-1210TIII only
ModulatorFET switching
Intermediate frequency60MHz
IF bandwidth10MHz, 3MHz
TuningAuto/manual selectable
Supplied system cable15m; 49.2ft; OPC-234120m; 65.6ft; OPC-2342

PRINTER FURUNO PP520

HARGA : RP 39,500,000

Furuno Printer 24VDC GMDSS For Felcom PP520





































ICOM IC-M424 VHF Marine Transceiver

HARGA : RP 5,250,000

Specifications

General
Frequency Range
  Tx
  Rx

156.025–157.425 MHz
156.050–163.275 MHz
Usable channelsINT, USA, CAN, WX channels
Type of emission16K0G3E (FM)
16KOG2B (DSC)
Power supply requirement13.8V DC ±15%
Current drain (at 13.8V DC)
  Tx 25W output
  Rx AF max. (RX SP ON)

5.5A
5A (External speaker)
Operating temperature range-20°C to +60°C; -4°F to +140°F
Antenna Impedance50Ω (SO-239)
Dimensions (W×H×D)
(Projections not included)
180 × 82 × 119.9 mm;
7.09 × 3.23 × 4.72 in
Weight (approx.)14kg; 3.09lb
NMEA in/out formatsRMC, GGA, GNS, GLL, DSC, DSE
Transmitter
Output power (at 13.8V DC)25W, 1W
Max. frequency deviation± 5 kHz
Frequency stability±10ppm (-20°C to +60°C)
Spurious emissionsLess than –70dBc
Residual modulationMore than 40dB
Adjacent channel powerMore than 70dB
Audio frequency response+1dB to –3dB of 6dB octave
from 300Hz to 2500Hz
Receiver
Intermediate frequency1st 21.7MHz, 2nd 450kHz
Sensitivity (at 12dB SINAD)0.22µV typical
Squelch sensitivityLess than 0.22µV
Adjacent Channel SelectivityMore than 70dB
Spurious responseMore than 70dB
IntermodulationMore than 70dB
Hum and noise ratioMore than 40dB
Audio output power
External speaker
(at 10% distortion, 4 ω load)
10W typical
Measurements made in accordance with TIA/EIA-603. All stated specifications are subject to change without notice or obligation.
Applicable IP Rating
Ingress Protection Standard
WaterIPX7 (Waterproof protection)

ICOM IC M323

HARGA : RP 3,500,000

Built-in GPS Receiver (IC-M323G only)

The built-in GPS receiver shows your current position and time and can be used for DSC calls. GPS data source is selectable from internal and external GPS (and GPS OFF setting).

Intuitive User Interface

Icom's common Marine Family User Interface provides simple operation for the boat owner. A rotary selector and directional keypad provide intuitive operation. The high-definition dot-matrix display allows all information to be clearly viewed.

Built-in Class D DSC

The built-in DSC watch function monitors Ch. 70 (DSC channel) activity, even while you are receiving another channel. DSC functions include: distress, individual, group, all ships, urgency, safety, position request/report, polling request and DSC test calls.

IPX7 Waterproof Protection

The IC-M323/G withstands submersion in up to 1.0m depth of water for 30 minutes. It is equivalent to the IPX7 standard.

Common NMEA Interface

When receiving DSC information from another vessel, the IC-M323/G can transfer it to a navigational device via NMEA 0183 connectivity.

Compatible with MA-500TR Class B AIS Transponder

The IC-M323/G can be integrated with the MA-500TR Class B AIS Transponder, which allows you to transmit DSC individual calls to a selected vessel instantly without manual MMSI entry. It is very handy if you are waiting to contact vessels on the AIS screen - an essential safety feature in an emergency.